Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation


Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
+ 2. Engine
+ 3. Power supply system
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
- 8. Steering
   8.1. Technical characteristics
   8.2. Steering draft
   8.3. Steering mechanism
   8.4. Steering wheel
   8.5. Steering column
   8.6. Ignition lock
   8.7. Adjustment of the mechanism of a steering
   8.8. Steering draft (a steering with the hydraulic booster)
   8.9. Pump of the hydraulic booster of a steering
   8.10. Check of level of liquid
   8.11. Liquid replacement in hydraulic system
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

8.8. Steering draft (a steering with the hydraulic booster)
GENERAL INFORMATION

The steering mechanism with the hydraulic booster
1–external spherical hinge;
2–right tip of steering draft;
3–lock-nut;
4–antisplash cover;
5–collar;
6–right steering draft (regulirumy);
7–arm;
8–nut;
9–rubber pillow;
10-steering mechanism assembled;
11-suspension bracket beam;
12-bolt;
13-bolt;
14-driveshaft hinge;
15-nut;
16-a bringing hose;
17-a taking-away hose;
18-left steering draft (neregulirumy);
19-nut;
20-stopper;
21-laying;
22-tank;
23-collar;
24-collar;
25-laying;
26-pump

Removal

PERFORMANCE ORDER
1. To remove the steering mechanism together with drafts (see subsection 8.3), having disconnected thus bringing 16 (see fig. The steering mechanism with the hydraulic booster) and taking away the 17th hoses of hydraulic system and having muffled openings.
2. To clear of dirt the steering mechanism and steering drafts.
6. To measure length of a carving of the external spherical hinge 15 acting from under a nut 1, and to write down it (see fig. Steering mechanism).
7. To turn off a nut of 1 external spherical hinge 15.
4. To clamp in a vice with sponges from soft metal a gear lath of the steering mechanism.
8. Выпрессовать external spherical hinge 15 of steering draft.
9. To remove a collar 5 from an antisplash cover 6.
10. To pull together an antisplash cover 6 from a flange 24 cases of the steering mechanism and to shift it.

Installation

Installation of the mechanism of a steering and helmsmen of drafts make as it should be, the return to removal (see subsections 8.2 and 8.3).