Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation

Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
+ 2. Engine
+ 3. Power supply system
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
- 11. Body
   11.1. Forward buffer
   11.2. Back buffer
   11.3. Overlay of the back buffer
   11.4. Radiator facing
   11.5. Front panel
   11.6. Forward wing
   11.7. Локарь
   11.8. Decorative molding
   11.9. Drains
   11.10. Decorative overlays of drains of a roof
   11.11. Door handles
   11.12. External lock of a door
   11.13. Internal lock of a door
   11.14. Adjustment of the limiter of the lock of a door
   11.15. External rear-view mirror
   11.16. Upholstery of the panel of a door
   11.17. Door glass
   11.18. Wind and lateral motionless glass
   11.19. Internal handle of a door
   + 11.20. Window regulator
   11.21. Central blocking of locks of doors
   11.22. Forward seat
   11.23. Back door
   11.24. Mechanism of management of a heater
+ 12. Electric equipment

11.21. Central blocking of locks of doors

GENERAL INFORMATION

Central blocking of locks of doors

1–antisplash cover;
2–control unit of a forward right door;
3, 7, 9, 11 – tees;
4–control unit of a back right door;
5–control unit of a cover of a fuel tank;

6–plug;
8–control unit of a door of a back;
10-electropump;
12-control unit of a back left door;
13-control unit of a forward left door;
14-pipeline;
15-electricity cable

The central blocking of locks of doors consists of the electropump, pipelines, electric wires and control units blocking of doors.

Prevention

After long parking or replacement of the electropump it is necessary to make some inclusions for normal work of the central blocking of locks of doors.

ELECTROPUMP

Electropump of the central blocking

1–belt;

2–block;

3–pipeline;

4–tee;

5–case;

6–electropump

Removal

PERFORMANCE ORDER

1. To remove a belt of 1 fastening of the electropump.

2. To separate two parts of the case 5 and to take out the electropump 6.

3. To disconnect the pipeline 3 from the electropump union.

4. To disconnect a block 2 with wires from the electropump socket.

Installation

Installation of the electropump make as it should be, the return to removal.

CONTROL UNIT DOOR BLOCKING

Removal

PERFORMANCE ORDER

1. To remove an upholstery of the panel of a door (see subsection 11.16).

2. To unscrew two bolts of fastening of the control unit 2 door blocking (see fig. Central blocking of locks of doors).

3. To disconnect a block with wires from the control unit socket door blocking.

4. To disconnect draft of the lock.

Installation

Control unit installation by blocking of a door make as it should be, the return to removal.