Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation



Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
+ 2. Engine
+ 3. Power supply system
+ 4. Coupling
- 5. Transmission
   5.1. Removal and installation
   + 5.2. Four-speed transmission
   - 5.3. Five-speed transmission
      5.3.1. Technical characteristics
      + 5.3.2. Transmission dismantling
      5.3.3. Transmission assembly
      5.3.4. Position of the lever of gear shifting and connecting plug
      5.3.5. Gear shifting mechanism
   + 5.4. Type 020 four-speed transmission
   + 5.5. Type 020 five-speed transmission
   + 5.6. Automatic transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

5.3. Five-speed transmission

5.3.1. Technical characteristics

GENERAL INFORMATION

Type 085 transmission

1–bolt;
2–semi-axis flange;
3–epiploon;
4–plug;
5–spring;
6–washer;
7–rasporny ring;
8–adjusting washer;
9–roller conic bearing;
10-gear wheel of a drive of a speedometer;
11-differential case;
12-a conducted gear wheel of the main
transfers;
13-separator;
14-conic gear wheel;
15-round nut;
16-satellite;
17-axis of satellites;
18-pin;
19-shaft of a drive of a speedometer;
20-carving plug;
21-lock ring;
22-synchronizer of the 5th transfer;
23-spring;
24-a blocking ring;
25-gear wheel of the 5th transfer;
26-needle bearing;
27-washer;
28-roller conic bearing;
29-basic washer;
30-gear wheel of the 1st transfer;
31-needle bearing;
32-a blocking ring;
33-lock ring;

34-spring;
35-synchronizer cracker;
36-synchronizer;
37-lock ring;
38-a blocking ring;
39-gear wheel of the 2nd transfer;
40-needle bearing;
41-gear wheel of the 3rd transfer;
42, 43 – a lock ring;
44-gear wheel of the 4th transfer;
45-secondary shaft;
46-bearing;
47, 48 – an adjusting washer;
49-bearing;
50-washer;
51-needle bearing;
52-gear wheel of the 4th transfer;
53-a blocking ring;
54-lock ring;
55-spring;
56-synchronizer;
57-synchronizer cracker;
58-lock ring;
59-a blocking ring;
60-gear wheel of the 3rd transfer;
61-needle bearing;
62-primary shaft;
63-roller conic bearing;
64-gear wheel of the 5th transfer;
65-spring washer;
66-bolt;
67-backing gear wheel;
68-shaft of a gear wheel of a backing;
69-bolt

Five-speed transmission with synchronization of all transfers.

Designation
085
Refueling volume
3,1 l
Oil type
SAE 80 or SAE 90
Transfer relations:
  – 1st transfer
3,46
  – 2nd transfer
1,96/2,09
  – 3rd transfer
1,25/1,496
  – 4th transfer
0,891/1,122
  – 5th transfer
0,740/0,891
  – backing
3,38
  – main transfer
4,063/4,26