Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation



Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
+ 2. Engine
+ 3. Power supply system
- 4. Coupling
   4.1. Technical characteristics
   + 4.2. Type 084 transmission
   - 4.3. Type 020 transmission
      4.3.1. Mechanism of switching off of coupling
      4.3.2. Rope of a drive of coupling
      4.3.3. Coupling pedal
      4.3.4. Adjustment of a drive of coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment




4.3.2. Rope of a drive of coupling

GENERAL INFORMATION

Drive of switching off of coupling (type 020 transmission)

1–balancing гружик;
2–fixture of a rope of coupling;
3–lever of switching off of coupling;
4–transmission case;
5–rubber laying;
6–the directing plug;
7–rope;
8–adjusting washer;
9–lock-nut;
10-plug;
11-rope cover;
12-tip;
13-gear washer;
14-sealing ring;
15-plug;
16-axis;
17-limiters of a course of a pedal;

18-arm;
19-shaft of a pedal of coupling;
20-brake pedal;
21-spring;
22-gear segment;
23-coupling pedal (a self-regulating drive);
24-coupling pedal (an adjustable drive);
25-plug;
26-spring;
27-bolt;
28-spring;
29-clamp;
30-plug;
31-lock ring

The shock-absorber on the top tip of the rope, established since 1988.


Rope adjustment (release models since 1988)

1–bracket;

2–hairpin

Removal

PERFORMANCE ORDER
Adjustable drive
1. To weaken a lock-nut 9 and to wind on a carving core an adjusting washer 8, to weaken a rope 7.
2. To remove fixture 2 from the bottom end of a rope of the 7th drive of coupling.
3. To disconnect the top end of a rope of a drive of coupling from a pedal of 24 couplings.
4. To pull out a rope 7 together with a cover 11 in the direction of a motor compartment.
Self-regulating drive
5. To turn forward a gear segment 22 and to block it by means of a clamp 29.
6. To remove a rope of a drive of coupling.

Prevention

Since 1988 on the top tip of a rope of a drive of coupling the shock-absorber (see fig. is established. The shock-absorber on the top tip of the rope, established since 1988). In this regard a sealing ring do not establish.


Release models since 1988.
7. To press a pedal of coupling 23 several times against the stop.
8. To compress a rope cover at an arm on a transmission case (see fig. Rope adjustment (release models since 1988)).
9. To establish a bracket 1 and to fix it a hairpin 2.
10. To remove fixture 2 (see fig. Drive of switching off of coupling (type 020 transmission) coupling rope.
11. To disconnect the top tip of a rope from a coupling pedal.
12. To pull out a rope 7 with a cover 11 in the direction of a motor compartment.

Installation

PERFORMANCE ORDER
1. Installation of a rope of a drive of coupling make as it should be, the return to removal, taking into account the following.
2. To check the correct installation of the directing plug 6 (see fig. A drive of switching off of coupling (type 020 transmission) with rubber laying 5 and a sealing ring 14, a gear washer 13 and a tip 12.
3. To grease open parts of a rope with the 7th universal greasing.
Adjustable drive
4. To adjust a coupling drive (see subsection 4.3.4).
Self-regulating drive
5. To adjust a coupling drive, having pressed several times a coupling pedal.
Release models since 1988.
6. To pass the top tip of a rope through an opening in a guard of a front and to attach it to a coupling pedal.
7. To press a hand a pedal of coupling and at the same time to pull a rope forward (work to carry out together).
8. To compress a cover of a rope and to establish a bracket 1 (see fig. Rope adjustment (release models since 1988)), having fixed it a hairpin 2.
9. To establish fixture 2 (see fig. Drive of switching off of coupling (type 020 transmission) coupling rope.
10. To adjust a coupling drive, having pressed several times a coupling pedal.