Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation

Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
+ 2. Engine
- 3. Power supply system
   + 3.1. Power supply system of carburetor engines
   - 3.2. A power supply system of engines with fuel injection
      3.2.1. Replacement of a filtering element of the air filter
      3.2.2. Frequency of idling and the maintenance of an oxide of carbon in the fulfilled gases
      3.2.3. Check of the valve of start-up of the cold engine and thermoswitch
      3.2.4. Check of the air valve of start-up of the cold engine
      3.2.5. Check of the valve of warming up of the engine
      3.2.6. Check and replacement of nozzles
      3.2.7. Plate of a measuring instrument of a consumption of air
      3.2.8. Fuel distributor
      3.2.9. Measuring instrument of a consumption of air
      3.2.10. Pressure regulator
      3.2.11. The pumping-up fuel pump
      3.2.12. Fuel pump
      3.2.13. Fuel filter
      3.2.14. Fuel accumulator
      3.2.15. Fuel tank
      3.2.16. Adjustment of a cable of an accelerator
   + 3.3. Power supply system of diesel engines
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

3.2.8. Fuel distributor

Removal and installation

1. To disconnect wires from the storage battery.
2. To dump pressure in топливопроводах (see subsection 3.2.6 item 4).
3. To mark an arrangement and to disconnect everything топливопроводы from the distributor 12 (see fig. Elements of system of injection of K-Jetronic fuel) fuels.
4. To unscrew three screws of fastening of the distributor 12 and carefully to remove it. To watch, that the piston 14 did not drop out of the distributor. If the piston casually drops out, to wash out it in gasoline and to insert into place down the end with a facet.
5. Before installation of the distributor to check, that the piston 14 freely moved up and down, otherwise to replace the fuel distributor. To replace a sealing ring 15. To establish the fuel distributor upside-down.