Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation



Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
+ 2. Engine
- 3. Power supply system
   - 3.1. Power supply system of carburetor engines
      3.1.1. Replacement of a filtering element of the air filter
      3.1.2. Removal and installation of the air filter
      3.1.3. Temperature regulator check
      3.1.4. Check of the valve of a temperature regulator
      3.1.5. Removal and installation of the fuel pump
      3.1.6. Check of pressure of forcing of the fuel pump
      3.1.7. Fuel level sensor replacement
      3.1.8. Removal and installation of a fuel tank
      3.1.9. Replacement of the fuel filter
      3.1.10. Removal and installation of the fuel tank
      3.1.11. Accelerator cable
      + 3.1.12. Carburetor
   + 3.2. A power supply system of engines with fuel injection
   + 3.3. Power supply system of diesel engines
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment




3.1.7. Fuel level sensor replacement

GENERAL INFORMATION

Fuel tank

1–fuel tank;
2–collar of fastening of a fuel tank;
3–bolt of fastening of a fuel tank;
4–bulk pipe;
5–bolt of fastening of a bulk pipe;
6–hose of ventilation of a fuel tank;
7–collar;
8–plug;
9–gravitational valve;
10-rasporny ring;
11-stopper of a fuel tank;
12-sealant of a jellied mouth;
13-hose;
14-tube of the return fuel plum;
15-nut of fastening of the sensor;
16-fuel level sensor;
17-топливопровод to the fuel pump;
18-nut of fastening of the valve;
19-air valve;
20-a wire from a jellied pipe on "weight";
21-sealing ring;
22-broad tank

PERFORMANCE ORDER
1. To disconnect a wire from the "minus" plug of the storage battery.
2. To take out a rug of a trunk floor and to uncover, closing the fuel level sensor.
3. To disconnect from the sensor 16 a connecting block with wires.
4. To disconnect hoses 14 and 17 from the sensor 16.
5. To unscrew a nut 15 and to take out from a fuel tank the sensor 16.
6. To remove a sealing ring 21.
7. To establish the sensor 16 with a new sealing ring 21. To turn the sensor so that labels on the sensor and a fuel tank were combined.
8. To wrap a nut 15.
9. To connect to the sensor hoses 14 and 17.
10. To connect an electric connecting block.
11. To establish a cover in a trunk floor and a trunk floor rug.