Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation

Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
- 2. Engine
   2.1. Removal and engine installation
   - 2.2. Dismantling and engine assembly
      + 2.2.1. Engines in volume of 1,1 and 1,3 l
      + 2.2.2. Engines in volume of 1,6 and 1,8 l
      - 2.2.3. Diesel engine
         2.2.3.1. Camshaft drive
         2.2.3.2. Removal and installation of a head of the block of cylinders
         2.2.3.3. Dismantling of a head of the block of cylinders
         2.2.3.4. Check and repair of a head of the block and its details
         2.2.3.5. Assembly of a head of the block of cylinders
         2.2.3.6. Adjustment of gaps between cams of a cam-shaft and levers of valves
         2.2.3.7. Technical condition of hydropushers of valves
         2.2.3.8. Intermediate shaft
         2.2.3.9. Flywheel
         2.2.3.10. Epiploons of a cranked shaft
         2.2.3.11. Oil case
         2.2.3.12. Oil pump
         2.2.3.13. Shatunno-porshnevaya group
         2.2.3.14. Cranked shaft
         2.2.3.15. Check of the block of cylinders
   + 2.3. System of greasing of the engine
   + 2.4. System of cooling of the engine
   + 2.5. System of production of the fulfilled gases
+ 3. Power supply system
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

2.2.3.6. Adjustment of gaps between cams of a cam-shaft and levers of valves

GENERAL INFORMATION

Adjustment is required for release engines to 08.1985 g. Since September, 1985 on diesel engines began to establish hydropushers of valves therefore need for adjustment of gaps of valves disappeared. Adjustment make the same as at petrol engines in working volume of 1,6 and 1,8 l (see subsection 2.2.2.5).