Volkswagen Golf ll, Jetta II
1983-1992 of release
Repair and car operation
Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
- 2. Engine
2.1. Removal and engine installation
- 2.2. Dismantling and engine assembly
+ 2.2.1. Engines in volume of 1,1 and 1,3 l
- 2.2.2. Engines in volume of 1,6 and 1,8 l
18.104.22.168. Camshaft drive
22.214.171.124. Removal and installation of a head of the block of cylinders
126.96.36.199. Dismantling of a head of the block of cylinders
188.8.131.52. Assembly of a head of the block of cylinders
184.108.40.206. Adjustment of gaps between cams of a cam-shaft and levers of valves
220.127.116.11. Intermediate shaft
18.104.22.168. Epiploons of a cranked shaft
22.214.171.124. Oil pump
126.96.36.199. Shatunno-porshnevaya group
188.8.131.52. Cranked shaft
184.108.40.206. Check of the block of cylinders
+ 2.2.3. Diesel engine
+ 2.3. System of greasing of the engine
+ 2.4. System of cooling of the engine
+ 2.5. System of production of the fulfilled gases
+ 3. Power supply system
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
Removal, check and installation of a cranked shaft make the same as at engines in working volume of 1,1 and 1,3 l (see subsection 220.127.116.11).
Different data are provided below.
Axial gap of a cranked shaft of 0,07-0,17 mm.
Maximum permissible axial gap of 0,25 mm.
Nominal diameter of a radical neck of 53,958-53,978 mm.
Nominal diameter of a shatunny neck of 47,758-47,778 mm.
Maximum permissible gap between the shatunny loose leaf and a neck of a cranked shaft of 0,12 mm.