Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation



Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
- 2. Engine
   2.1. Removal and engine installation
   - 2.2. Dismantling and engine assembly
      + 2.2.1. Engines in volume of 1,1 and 1,3 l
      - 2.2.2. Engines in volume of 1,6 and 1,8 l
         2.2.2.1. Camshaft drive
         2.2.2.2. Removal and installation of a head of the block of cylinders
         2.2.2.3. Dismantling of a head of the block of cylinders
         2.2.2.4. Assembly of a head of the block of cylinders
         2.2.2.5. Adjustment of gaps between cams of a cam-shaft and levers of valves
         2.2.2.6. Intermediate shaft
         2.2.2.7. Flywheel
         2.2.2.8. Epiploons of a cranked shaft
         2.2.2.9. Oil pump
         2.2.2.10. Shatunno-porshnevaya group
         2.2.2.11. Cranked shaft
         2.2.2.12. Check of the block of cylinders
      + 2.2.3. Diesel engine
   + 2.3. System of greasing of the engine
   + 2.4. System of cooling of the engine
   + 2.5. System of production of the fulfilled gases
+ 3. Power supply system
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

2.2.2.10. Shatunno-porshnevaya group

GENERAL INFORMATION

Shatunno-porshnevuyu group remove and assort the same as at engines in working volume of 1,1 and 1,3 l (see subsection 2.2.1.12).

Survey, check and repair make the same as at engines in working volume of 1,1 and 1,3 l, but it is necessary to consider that the maximum permissible gap between the piston and the cylinder makes 0,07 mm.

Assembly of shatunno-piston group is made the same as at engines in working volume of 1,1 and 1,3 l. Depth of dredging in a piston head (see fig. The amount of dredging in a piston head) the engine of 1,6 l – 2,2 mm, the engine of 1,8 l – 4,4 mm.