Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation


Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
+ 2. Engine
+ 3. Power supply system
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
- 11. Body
   11.1. Forward buffer
   11.2. Back buffer
   11.3. Overlay of the back buffer
   11.4. Radiator facing
   11.5. Front panel
   11.6. Forward wing
   11.7. Локарь
   11.8. Decorative molding
   11.9. Drains
   11.10. Decorative overlays of drains of a roof
   11.11. Door handles
   11.12. External lock of a door
   11.13. Internal lock of a door
   11.14. Adjustment of the limiter of the lock of a door
   11.15. External rear-view mirror
   11.16. Upholstery of the panel of a door
   11.17. Door glass
   11.18. Wind and lateral motionless glass
   11.19. Internal handle of a door
   + 11.20. Window regulator
   11.21. Central blocking of locks of doors
   11.22. Forward seat
   11.23. Back door
   11.24. Mechanism of management of a heater
+ 12. Electric equipment

11.12. External lock of a door
GENERAL INFORMATION

External lock of a door

and – a view with the established lead;
– a view with the removed lead;
1–screw;
2–lead;
3–spring;
4–lock switch;
5–door handle

Removal

PERFORMANCE ORDER
1. To remove the door handle (see subsection 11.11).
2. To insert a key into the lock.
3. To unscrew the screw 1 (the top drawing).
4. To remove a lead 2 switches of the lock of a door.
5. To remove a spring 3 (the bottom drawing).
6. To remove the switch 4 locks with the inserted key.
Prevention

To take out a key from the switch of the lock it is possible only after wound the lock switch with an insulating tape, differently will drop out сувалды the lock.

On the case of the switch of the lock code number for a key is put.

Installation

PERFORMANCE ORDER
1. To establish the switch 4 locks in the door handle.
2. To establish a spring so that its ends were assigned a ledge on the case of the switch of the lock.
3. To establish a lead 2 on a square seat of the case of the switch 4 locks.
4. To twirl the screw 1.
5. To establish the door handle 5 on a door (see subsection 11.11).