Volkswagen Golf ll, Jetta II

1983-1992 of release

Repair and car operation



Volkswagen Golf 2 / Jett 2
+ 1.1. Short technical characteristics of diesel engines
+ 2. Engine
+ 3. Power supply system
+ 4. Coupling
+ 5. Transmission
+ 6. Transmission
+ 7. Forward drive
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
- 11. Body
   11.1. Forward buffer
   11.2. Back buffer
   11.3. Overlay of the back buffer
   11.4. Radiator facing
   11.5. Front panel
   11.6. Forward wing
   11.7. Локарь
   11.8. Decorative molding
   11.9. Drains
   11.10. Decorative overlays of drains of a roof
   11.11. Door handles
   11.12. External lock of a door
   11.13. Internal lock of a door
   11.14. Adjustment of the limiter of the lock of a door
   11.15. External rear-view mirror
   11.16. Upholstery of the panel of a door
   11.17. Door glass
   11.18. Wind and lateral motionless glass
   11.19. Internal handle of a door
   + 11.20. Window regulator
   11.21. Central blocking of locks of doors
   11.22. Forward seat
   11.23. Back door
   11.24. Mechanism of management of a heater
+ 12. Electric equipment




11.1. Forward buffer

GENERAL INFORMATION

Buffer fairing (release models from 08.89 g)

1–bottom fairing;

2–back fairing;

3–screw;

4–buffer

Fastening of an arm of the forward buffer

1–longeron;

2, 3 – bolts;

4–arm

Lateral directing the forward buffer

1–buffer;

2–lateral support;

3–the directing;

4–washer;

5–body;

I–directing on release models to 08.1989 g.

Removal

PERFORMANCE ORDER
1. To disconnect a block with wires of indexes of the turn, being at the right arm of the buffer.
2. To remove hoses of washers of headlights (if they were established).
3. To unscrew a fairing 1 and 2 (see fig. A buffer fairing (release models from 08.89 g)) from both parties of the car (on release models from 08.1989 g).
4. To unscrew bolts 2 and 3 (see fig. Fastening of an arm of the forward buffer) from both parties of fastening of arms of 4 buffers to longerons 1.
5. To remove the buffer 1 (see fig. Lateral directing the forward buffer), nominating him to itself from lateral directing 3.
6. If from the buffer arms act in film – previously to mark their mutual situation.

Prevention

From 8.89 g the design lateral directing (see fig. is changed. Lateral directing the forward buffer).


Installation

PERFORMANCE ORDER
1. To establish the buffer, having entered it in lateral directing 3.
2. To wrap bolts 2 and 3 (see fig. Fastening of an arm of the forward buffer) from both parties the moment of 82 N · m (8,2 kgfs · м).

Prevention

Bolts should twist only the same type that were established before dismantling.


3. To stretch a block with wires of indexes of turn through openings in an arm of the buffer and to attach it to the socket.
4. To establish hoses of washers of headlights (if are available).
5. To establish a fairing 1 and 2 (see fig. A buffer fairing (release models from 08.89 g)) from both parties of the car (on release models from 08.1989 g).